|Home||» Products||» SERVO ROLL FEEDER||» SERVO ROLL FEEDER|
Nc. SERVO ROLL FEEDER
FEATURES OF SAMAY-ASIA HIGH SPEED NC SERVO ROLL FEEDER
Aiming at the arrival of hi-tech industry, it is using close-loop feedback control computer system and high resolution encoder to make feeding precision within 20 microns (varied model has varied accuracy).
PROGRAMMABLE FEEDING FUNCTION:
Provide maximum 20 groups of different feeding length, each group provide 999 times punching to satisfy the special manufacture process. (Option)
HUMAN MANUAL MODE:
Can input 3 different manual speeds to provide use operate more easily and feed material more accuracy.
HIGH EFFICIENCY RELEASE DEVICE:
Quickly set up release angle base on press's Cam signal and simply material thickness adjustment.
CONTROL PANEL FUNCTION:
Designed feed length, count speed & angle function key for quickly setting. Feed length from 0.01 mm to 9999.99 mm.
The rollers adopt middle hollow style to be light and low inertia for electroplate. Roller surface hardness is HRC60 and hard chromium plated to extend lifetime.
*Stabilized steel frame construction.
*Adopted high quality and brushless servomotor as the drive to efficiently shorten the time for delivery adjustment and testing.
*Adopted high-sensitivity decoder to ensure back-feeding accuracy and improve loading accuracy.
*Adopted timing belt to safeguard the gap between gears to guarantee low abrasion, noiseless, free of lubrication, security and environmental protection.
*Motor is internally installed so as to avoid possible damages caused during transportation and loading.
* Standard mounting plate with adjustable feeding height from 40 mm to 140 mm above bolster top level.
CONTROL PANEL FEATURES:
The system can be operated in MANUAL/AUTO MODE.
The system can store 30 programs. The programming would have;
Feeding Speed of Material.
Acceleration of Roll Feed.
Part No. (Recipe)
REQUIREMENT ON POWER PRESS:
Press should have 2 potential free adjustable cam switch (Spare) for feed angle signal and pilot release signal.
In case of Electronic Cam: Press should have 2 (Spare) potential free relay for feed angle signal and pilot release signal.
FEEDING DIRECTION: Our all lines are designed & manufactured for feeding direction of LEFT TO RIGHT, in case of deviation, please specify while ordering your feed direction.